Loading ...
ZERO Wait. ZERO Waste.
The small and medium build platform for the Ackuretta SOL increasing printing speed, eliminating inefficiency.
The Ackuretta small and medium build platform for SOL, available for the entire CURO resin portfolio and select partner resins, reduce the printing time by up to 60% for highly efficient dental workflows - making SOL the fastest dental 3D printer available. Don't waste your time waiting around - print & deliver in a single visit.
Feel The Impact
Dental Models
- Printing time: 25 minutes at 100 μm layer thickness
- Speed increase: between 35 - 50% depending on resin
- Capacity: up to 2 models in flat orientation
- Recommended Resin: CURO Element beige/white for model printing & CURO Model
Surgical Guides
- Printing time: 20 - 30 minutes at 100 μm layer thickness
- Speed increase: between 40-50% depending on resin
- Capacity: 1 full arch guide
- Recommended Resin: CURO Guide
Denture Bases
- Printing time: 45 minutes at 100 μm layer thickness
- Speed increase: between 40 - 50% depending on resin
- Capacity: 1 full denture base
- Suitable for: Partial dentures, full denture bases
- Recommended Resin: CURO Pro Denture
The medium build platform is also suitable for printing: full-arch hybrids with the CURO Crown material, impression trays, inbonding bracket trays, full arch or partial denture bases, and much more. To find out which resin is most suitable for each application, visit our CURO resin portfolio.
Small Build Platform - High Speed & just what you need
Crowns & Bridges
- Printing time: 15 - 20 minutes at 100 μm layer thickness
- Speed increase: between 40 - 60% depending on resin
- Capacity: up to 3-unit bridge, or 4 individual crowns
- Recommended Resin: CURO Crown, BEGO VarseoSmile Crown plus
Castable Crowns & Bridges
- Printing time: 25 - 30 minutes at 100 μm layer thickness
- Speed increase: between 40 - 60% depending on resin
- Capacity: up to 3-unit bridge, or 4 individual crowns
- Recommended Resin: CURO Pro Cast
Gingiva Masks
- Printing time: 30 minutes at 100 μm layer thickness
- Speed increase: between 10 - 20% depending on resin
- Capacity: up to 3-unit mask, or 4 individual gingiva masks
- Recommended Resin: CURO Gingiva
How does a Smaller Build Platform Increase Printing Speed?
This is a very good question, because at first glance - it’s the same layer thickness, the same resin, the same 3D printer - how is it possible that the size of the build platform impacts the printing speed so much that some 3D prints are finished in up to less than 50% of the time?
There are three main factors influencing the printing speed of your printer:
- Peeling distance,
- Waiting time,
- Curing time
As the build platform is pushed into the vat, the resin is set into motion and is being displaced by the build platform. Naturally, a larger surface area will have a greater impact on the resin, and vice versa, a smaller surface area will have less impact.
The concept is basically the same as when you put your hand in a cup of water or just a finger - your hand is more likely to make greater waves than just your finger.
Why Does Resin Movement Matter?
As the build platform dips down and the printer prepares for curing - the waiting time is the time it requires for the resin to “settle” after the build platform stirred it up. If the waiting time isn’t sufficiently long, it may lead to uneven curing and may result in less accurate prints.
A large build platform will thus require a longer “resin settling” time than a small build platform. That’s how we at Ackuretta were able to optimize the printing speed with the medium and small build platform.
As this process is repeated over 100 times, the waiting time makes up a significant portion of the printing speed. By reducing this waiting period, we were able to achieve significantly higher printing speeds.
Make your 3D printer the fastest dental 3D printer on the market by adding the new build platforms for SOL. Achieve highly accurate and beautiful prints with each time - wasting zero time on fiddling, waiting up to 60% less.
