Effective: July 05, 2021
Our product quality and performance is of utmost importance to us. As such, Ackuretta provides a voluntary One-Year Limited Warranty (starting on the shipping date as shown on the Delivery Note) that goes above and beyond the conditions placed by general consumer law. Any replacement parts are covered by a 30-day warranty. The Ackuretta One-Year Limited Warranty benefits are in addition to, not instead of, rights provided by consumer law and do not limit or suspend rights provided by a region’s consumer laws. The rights provided by consumer law and the Ackuretta One-Year Limited Warranty are separate, so claims made for one set of conditions cannot be claimed for the other. For more information about consumer law rights, please consult a lawyer in your region, but see the section “Governing Law”, below.
Ackuretta provides an extended warranty for the DENTIQ and SOL 3D printers. The warranty for the DENTIQ starts on the shipping date as shown on the Delivery Note, whereas the warranty for the SOL 3D printer –which is a networked device– starts from the date of registration.
Ackuretta warrants that all products sold by Ackuretta or by a recognized Ackuretta distributor meet the following conditions:
2.1. The products are new, except for units that are clearly identified as refurbished or used,
2.2. The products conform strictly to their specifications,
2.3. The products are free from defects in design, material, and workmanship when used for their proper and intended purposes,
2.4. The products have been held under Ackuretta’s recommended environmental conditions, including units returned to Ackuretta, except during transit and customs checking, and
2.5. The products have not been misbranded, modified, or adulterated.
3.1. This warranty applies only to Products manufactured by or for Ackuretta that can be identified by the “Ackuretta” trademark, trade name, or logo affixed to the brand. The Warranty does not apply to any non-Ackuretta hardware products, materials, or any software, even if packaged and sold with hardware from Ackuretta.
3.2. Ackuretta reserves the right to exclude products from the One-Year Limited Warranty if any of the following are true:
3.3. Special sales and related promotional items such as Marketed Discounts, Early Bird Passes and similar items are not subject to refunds or returns and all sales are final.
4.1. Ackuretta categorizes all products into one of the following types. The “Product Types”, the “Warranty Period” for each type, and examples for each type, are as follows:
– DENTIQ 3D Printer
– SOL 3D Printer
– Diplo DLP 3D Printer
– Ackuray A135 DLP 3D Printer
– Ackuray A96 DLP 3D Printer
– FreeShape 120 LCD 3D Printer
– Cleani Dual Tank Washer
– Curie UV Box
– Ackuretta UV Box
– Build platforms
– Vats, vat film, or resin tanks
– Resins or materials
– Print screens
– Glass protectors
– Alpha 3D
– Omega 3D
– UV oven and safety goggles
– Ultrasonic cutters
– Ultrasonic cleaners
– Finishing tools or equipment
– Cables, cords, or adapters
– Wi-Fi dongle
– Hex key
4.2. Ackuretta reserves the right to change a Product’s given Product Type and/or Warranty Period at any time.
In the case that a product has a defect during the warranty period, a customer can do the following to determine the cause of the problem and receive warranty service if necessary:
5.1. The customer checks the Ackuretta online resources available to determine if a solution for any given problem is available. These online resources are available from the Ackuretta website (www.ackuretta.com).
5.2. The customer contacts the Ackuretta certified distributor from whom they purchased the printer.
5.3. If no solution can be found, the customer sends an email to Ackuretta support at email@example.com or contacts their local Ackuretta distributor. The Ackuretta representative or distributor may spend some time discussing the problem with the customer in order to determine the cause and if the warranty is applicable.
5.4. If the root cause is determined and the warranty applies, the user sends the defective product to Ackuretta or their Ackuretta distributor at their own expense. Ackuretta or the distributor will perform a follow-up test on the product to confirm the defect.
5.5. If the product is confirmed as defective, Ackuretta or the distributor will send a working product back to the customer—whether a replacement or a repaired product— at no cost to the customer.
Depending on the country, region, or jurisdiction, the warranty may not automatically include costs incurred for shipping, validation of claims, customs, taxes, or other unforeseen costs. Ackuretta only warrants the parts, labor, and replacement costs of products—payment of any other costs incurred will be determined on a case-by-case basis.
This warranty is governed in accordance with the laws of Taiwan (R.O.C.)
Ackuretta will comply with all applicable Taiwan laws, regulations, and taxes in its provision of services, products, and this warranty. Moreover, the Ackuretta One-Year Limited Warranty is in addition to any other consumer protection laws and rights customers may be subject to in other countries, regions, or jurisdictions.