Application Guide

  • Applications

  • Software

  • Resin

Dreve FotoDent Tray

FotoDent tray is a light-curing resin for the manufacturing of dental impression trays using 385 and 405 nm-LED-based DLP systems. The produced parts have a very smooth, homogeneous surface and manual reworking is nearly not necessary.

QuraBASE

Product Description

Application Temporary crowns
Color Ivory
Appearance Ivory
Viscosity (at 30°C) 230 m.Pas
Density (at 25°C) 1.10 g/cm^3
Water Content (%) <0.3
Ec, critical exposure (mJ/cm2) 11.5
Dp, depth of light penetration (mm) 0.107
Resolution Support 50~100 micron
Mechanical Properties (post-cured)
Shore Harness 80 D
Tensile Strength, MPA 35
Elongation at Break, % 2

Dreve FotoDent Tray Product Description

Properties
Color Green
Density 1.1-1.2g cm-3
Viscosity 1.0-1.3 Pa s
Cured Material
Post curing time using PCU EVO 12 min in a protective gas atmosphere
Flexural modulus >1850 MPa
Flexural strength ≥75 MPa
Elongation at break ≥4%
Hardness 80-90 Shore D