Dreve FotoDent Cast

FotoDent cast is a light-curing resin for the manufacturing of cauterization profiles for casting technology using 385 and 405 nm-LED-based DLP systems.

QuraGP

Product Description

Application Toys, Models, Prototypes, DIY parts, Assemblies and Casings
Color Grey
Appearance Opaque
Viscosity (at 30°C) 185 m.Pas
Density (at 25°C) 1.14 g/cm^3
Water Content (%) <0.3
Ec, critical exposure (mJ/cm2) 14.9
Dp, depth of light penetration (mm) 0.078
Resolution Support 50~100 micron
Mechanical Properties (post-cured)
Layer thickness, mm Exposure, mJ/cm2
0.1 51±10
0.05 33.6±6.7
0.025 29.6±5.9
Shore Harness 80 D
Tensile Strength, MPA 60
Elongation at Break, % 9

Dreve FotoDent Cast Product Description

Properties
Color Red-transparent
Density 1.1-1.2g cm-3
Viscosity <0.3 Pa s
Cured Material
Post curing time using PCU EVO 10 min in a protective gas atmosphere
Flexural modulus >2000 MPa
Flexural strength >100 MPa
Elongation at break 7.5-11%
Hardness 80-90 Shore D
Cauterisation Residual ash content Ca. 1.5%