QuraWAX SLA/DLP resin for direct investment casting


QuraWAX has been tirelessly formulated to give smooth surface quality finish, high definition detail, and easy burnout casting process suitable for jewelry and dental casting applications. QuraWAX is recommended for printing at 25 – 50 micron layer thickness.


  • Casting of dental crowns and bridges
  • Casting of studded jewelry patterns
  • Casting of high detail figurines


  • Smooth surface finish
  • High quality casting & high percentage success
  • Low thermal expansion (2%)
  • Wax like burn out process
  • No need to change investment powder
  • No need to modify traditional process

Quantity: 1000g

QuraWAX Material Safety Data Sheet

QuraWAX Product Description


Color Orange
Appearance Opaque
Viscosity (at 30°C) 155m.Pas
Density (at 25°C) 1.11 g/cm^3
Water Content (%) <0.3
Ec, critical exposure (mJ/cm2) 19.3
Dp, depth of light penetration (mm) 0.98
Resolution Support 25~50 micron
Mechanical Properties (post-cured)
Shore Harness 80 D
Tensile Strength, Mpa 38
Elongation at Break, % 5.5

Related Products